Desta Steel, located in Addis Ababa, Ethiopia, has built a solid reputation as a top-notch manufacturer and supplier of high-quality Carbon Steel EN-44 Bars. With a strong focus on precision engineering and strict adherence to international standards, Desta Steel ensures that its products deliver exceptional strength, durability, and reliability. The Carbon Steel EN-44 Bars are crafted using cutting-edge technology and undergo thorough quality testing to guarantee consistent performance. Tailored to meet the rigorous demands of various industrial sectors, these bars find extensive use in engineering, automotive, and construction industries both in Ethiopia and beyond.
The Carbon Steel EN-44 Bars are primarily made up of carbon, manganese, silicon, sulfur, and phosphorus, striking a perfect balance between strength and toughness. They boast a tensile strength ranging from about 700 to 850 MPa and a yield strength of around 350 to 450 MPa, depending on the heat treatment process. These bars are known for their high hardness, impressive wear resistance, and excellent machinability, making them perfect for heavy-duty applications. With outstanding fatigue strength and impact resistance, EN-44 Bars maintain their mechanical stability even under stress, ensuring a long service life in demanding industrial settings.
| Grade | EN44 |
|---|---|
| Specification | BS970 1.0904 55Si7 55S6 55Si2Mn ASTM 9255 |
| Round bar size | Diameter: 3-~800mm |
| Hex Bar size | 2-100mm A/F |
| Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Square bar size | 4 to 100mm |
| Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Section | 3.0 to 12.0mm thickness |
| Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Billet Size | 1/2″ to 495mm Diameter |
| Rectangles Size | 33 x 30mm to 295 x 1066mm |
| Finish | Cold (bright) drawn, centreless ground,smooth turned, peeled, slit rolled edge, hot rolled, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
| Condition | Hardened & tempered, annealed |
| Technique | EN45 Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
| Processing | Bar cutting to 650mm |
| Form | EN45 Welding Rod, Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
| Element | En42J |
| C | 0.75 – 0.90% |
| Mn | 0.50 – 0.90% |
| Si | 0/1 – 0.35 |
| S | 0.04% Max |
| P | 0.04% Max |
|
ULTIMATE TENSILE STRENGTH, S. (MPA) |
621 |
|---|---|
|
Modulus of elasticity, E (Gpa) |
204 |
|
Fatigue strength coefficient, of (Mpa) |
948 |
|
Fatigue strength exponent, b |
-0.092 |
|
Fatigue ductility coeffient ,ef |
0.26 |
|
Fatigue ductility exponent,c |
-0.445 |
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Type | SIZES (mm) | SIZES (Inches) | ISO Tolerance |
|---|---|---|---|
Cold Drawn and Polish | 3.00 – 75.00 | 1/8″ – 3.00″ | h8-h9-h10-h11 |
Cold Drawn and Ground | 10.00 – 75.00 | 5/6″ – 2.50″ | h8-h9-h10-h11 |
Peeled and Polished | 40.00 – 150.00 | 1.50″ – 6.00″ | h11, h11-DIN 1013 |
Peeled and Ground | 20.00 – 50.00 | 3/4″ – 2.00″ | h9-h10-h11 |
Cut to size on request (tolerance +2/-0 mm). Standard lengths of EN45 Bars 2000 mm up to 6000 mm available
5.0 | 45.0 |
6.0 | 50.0 |
7.0 | 55.0 |
8.0 | 60.0 |
9.0 | 65.0 |
10.0 | 70.0 |
12.0 | 75.0 |
16.0 | 80.0 |
20.0 | 90.0 |
25.0 | 100.0 |
30.0 | 130.0 |
35.0 | 160.0 |
40.0 | 200.0 |
Carbon Steel EN-44 Bars are widely utilized in the automotive, engineering, and machinery sectors for producing axles, shafts, gears, crankshafts, and connecting rods. Their remarkable tensile strength and wear resistance make them ideal for heavy-duty mechanical parts and tools. In construction, they serve as essential components in frameworks, support structures, and reinforcement elements. Additionally, these bars are used in industrial equipment, agricultural machinery, and power transmission systems. Their unique combination of strength, toughness, and cost-effectiveness makes Carbon Steel EN-44 Bars a go-to choice for a variety of engineering applications.
Desta Steel is a leading manufacturer, supplier and exporter of high-quality Carbon Steel, Alloy Steel, Mild Steel and Galvanized Steel products. Our extensive product range includes Pipes, Tubes, Flanges, Pipe Fittings, Forged Fittings, Sheets and Plates, catering to various industries in Addis Ababa, Ethiopia.
Copyright 2025 Desta Steel. All rights reserved
